# Quick Answer: How Much Does Gravel Work Cost?

## How much does gravel cost UK?

Average Cost Of Installing a Gravel DrivewayJob DescriptionDurationMaterial CostReplace gravel only (40 sq m)1 Day£850Small (20 sq m)1-2 Days£1200Medium (40 sq m)2 Days£1900Large (80 sq m)2-3 Days£3000Feb 5, 2020.

## How can I fix a cheap muddy driveway?

Solution 1: In the muddy sections of the driveway, you can add small rocks or crushed stones. Put in enough rocks or stones so that the excess mud can seep between the rocks or stones. By doing this, there are virtually no more holes for the mud to settle into. There should be no space between the rocks or stones.

## How much is a dump truck load of gravel?

Truckload of Pea Gravel Cost Dump trucks can typically carry about 25 tons of pea gravel. The cost of pea gravel in this quantity will cost \$10 to \$20 per ton, or \$250 to \$500 per truckload.

## How much does a 50 lb bag of gravel cover?

A 50# bag contains approximately 0.5 cubic feet of gravel. To cover 8′ x 8′ x 1/6′ (2″) will take around 10.7 cubic feet, or 22 bags – you’ll have a bit extra for spillage.

## How much does a ton of gravel cover?

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

## How much is a ton of driveway gravel?

Danny Davis, owner of Davis Outdoor Maintenance, in Chattanooga, Tennessee, says the cost of crushed stone in his area is \$100 to \$120 per ton, installed. He says the average sized driveway is about 20-by-20 feet, which requires about 13 tons of crushed rock and costs \$1,300 to \$1,500, including materials and labor.

## What is the cheapest way to do a driveway?

Gravel and Stones A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound.

## What is the cheapest gravel for a driveway?

Pea gravelPea gravel is relatively inexpensive and easy to work with, and it’s commonly used to create gravel driveways. Pea gravel is also a durable, low-maintenance driveway material.

## How deep should I lay gravel?

What depth of gravel do I need? You would usually lay a 10mm aggregate at a depth of 30-40mm, but on a driveway this would need to be at least 50mm. A 20mm aggregate would need to be at least 40-50mm deep, and at least 50-60mm on driveways. A larger aggregate will settle and bond together better than smaller ones.

## How much gravel do I need calculator?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

## How much does a 25kg bag of gravel cover?

As a rule of thumb 1 of our 25kg bags will cover an area of 0.25m to a recommended depth of 50mm.

## What area will 1 ton of gravel cover?

How many square meters does a ton of gravel cover? One tonne will cover 14 square metres. If you want to apply them in a normal depth 50 mm for a driveway. 1 tonne will be sufficient to cover approximately 20 square metres for pedestrian pathways, 35mm depth is normally sufficient for pedestrian pathway.

## How many inches deep should a gravel driveway be?

The depth of the gravel can vary, but should be at least 4 to 6 inches. To determine this measurement in feet, divide the number of inches by 12 (for example, 6 inches is 0.5 feet). If you plan to do two to three layers, each layer will need to be 4 to 6 inches thick, so you will to calculate each layer separately.

## How much is a ton of gravel cost UK?

Most large bags are sold in 800kg – 850kg amounts. If you were to buy the equivalent bags to make up a tonne, then the average cost of gravel per ton is £73.32….How much is a ton/tonne of gravel?Type of gravelAverage costCost of pea gravel per ton/tonneFrom £106.50Cost of gravel for small driveway£1,7004 more rows

## What is the best size gravel for a driveway?

A commonly used gravel size for driveway base layers is #3 gravel. This rock is generally 1-2 inches in diameter and does double duty by establishing a solid, reliable foundation and providing adequate drainage; both critical factors in driveway construction.